Carbide Tipped Granite Chisel, Carbide Tip Hand Tracer, Pitching Tool, Round Hammer, Stone Working Tools

Our featured Stone Masonry Tools, Stone Carving Tools &
Pitching Tools to Round Hammers

Stone Tools ordering
code
width
mm
length
mm
steel size
mm
width
inches
length
inches
steel size
inches

Pitching Tools Oval Body

SM40-o 40 190 40x30 1 5/8" 7 1/2" 1 1/4"
SM50-o 50 190 40x30 2" 7 1/2" 1 5/8"

Pitching Tools Round Body

SM40-R 40 190 33 1 5/8" 7 1/2" 1 3/8"
SM50-R 50 190 33 2" 7 1/2" 1 3/8"

Pitching Tool Hexagon Body

SM40-H-F 40 245 25 1 5/8" 9 5/8" 1"

Pitching Tool Hexagon Body

SM40-HEX 40 190 25 1 5/8" 7 1/2" 1"

Hand Tracer, Oval Body

RIM38-o 38 190 30x40 1 1/2" 7 1/2" 1 1/4"
x
1 5/8"
RIM50-o 50 190 30x40 2" 7 1/2"

Hand Tracers Round Body

RIM38-R 38 190 33 1 1/2" 7 1/2" 1 3/8"
RIM50-R 50 190 33 2" 7 1/2" 1 3/8"

Hand Chisels Octagon Body

HM12 12 185 16 1/2" 7 1/2" 5/8"
HM16 16 185 16 5/8" 7 1/2" 5/8"
HM20 20 190 22 3/4" 7 1/2" 7/8"
HM25 25 190 25 1" 7 1/2" 1"

Hand Point Octagon Body

PKM19 9 190 19 3/8" 7 1/2" 3/4"
PKM22 9 190 22 3/8" 7 1/2" 7/8"
PKM25 9 190 25 3/8" 7 1/2" 1"

Round Hammers

1031-O Weight 1.0kg 2.2 pounds
1031-A Weight 1.2kg 2.5 pounds
 

Pitching Tool - Hand Set

SM40-O, SM50-O

This pitching tool is also known as a hand set. The SM40-O has a 1-1/2" wide flat carbide blade and the SM50-O has a 2" blade, both with an oval body. Stone masons tip this carbide hand chisel on its edge and strike it along a line to square and trim granite or other hard stone. When the blade becomes dull, turn and use the other edge. The tungsten carbide on this chisel is recessed deep into the steel body allowing for multiple sharpening and long life.

 

Pitching Tool - Hand Set

SM40-R, SM50-R

This pitching tool is also known as a hand set. The SM40-R has a 1-1/2" wide flat carbide blade and the SM50-R has a 2" blade, both with a round body. Stone masons tip this carbide hand chisel on its edge and strike it along a line to square and trim granite or other hard stone. When the blade becomes dull, turn and use the other edge. The tungsten carbide on this chisel is brazed deep into the steel body allowing for multiple sharpening and long life.

 

Pitching Tool - Hand Set

SM40-H-F

This pitching tool is also known as a hand set. The SM40-H-F has a hexagonal body and a 1-1/2" wide carbide blade on a slight angle. Stone masons tip this carbide hand chisel on its edge and strike it along a line to square and trim granite or other hard stone. The tungsten carbide on this chisel is recessed deep into the steel body allowing for multiple sharpening and long life.

 

Hand Set - Pitching Tool

SM40-HEX

This special pitching tool or hand set has a 1-1/2" wide one sided carbide blade and a hexagonal body. Stone masons tip this carbide hand chisel on its edge and strike it along a line to square and trim granite or other hard stone. The tungsten carbide on this hand chisel should be sharpened regularly for safe and efficient use.

 

Tracer Chisel - Carbide Tip

RIM38-O, RIM50-O

This carbide tipped tracer chisel has a two sided angled carbide designed for splitting stone. The RIM38-O has a 1-1/2" wide blade and the RIM50-O has a 2" blade, both with an oval body. Stone masons use this tool by holding it vertically to the stone moving it back and forth to score a split line in the rock. The high quality tungsten carbide tip is designed for use on granite or other hard stone. This versatile chisel can also be used for shaping stone. Sharpening the carbide regularly will allow for long life of the chisel.

 

Carbide Tipped Tracer Chisel - stone splitting

RIM38-R, RIM50-R

This carbide tipped tracer chisel has a two sided angled carbide designed for splitting stone. The RIM38-R has a 1-1/2" wide blade and the RIM50-R has a 2" blade, both with a round body. Stone masons use this tool by holding it vertically to the stone moving it back and forth to score a split line in the rock. The high quality tungsten carbide tip is designed for use on granite or other hard stone. This versatile chisel can also be used for shaping stone. Sharpening the carbide regularly will allow for long life of the chisel.

 

Small Carbide Chisel - sculptors

HM12, HM16, HM20, HM25

These small carbide tipped chisels are used by stone masons or sculptors for detailed stone shaping. The HM20 & HM25 are also useful for removing drill marks and rough edges. The high quality tungsten carbide is recessed deep into the steel body making a long lasting tool.

 

Point - stone working tool

PKM19, PKM22, PKM25

This point has an octagonal body with a 3/8" tungsten carbide point. Stone masons use a point to remove high spots in granite and other hard stone by striking at different angles around the area to be removed. A hand point is also perfect for roughing out or for removing drill marks in rock. The carbide tip should be sharpened regularly for safe and efficient use.

 

Bellota Hammer, Bell Hammer, (stone working tool)

1031-O, 1031-A

The Bellota round hammer is perfect for stone masons to use on their Rebit hand chisels. The 2.2Lb (1031-O) and 2.5Lb (1031-A) are the ideal weight and shape for comfortable day long use. The round head on the bell hammer allows for a controlled swing as opposed to having to direct the head of a regular hammer.

 

Visa Accepted

Visa & Mastercard Orders accepted by phone, fax or email

MasterCard Accepted

Micon Products Ltd.
1325 Cartwright Street, Granville Island
Vancouver BC, Canada V6H 3R7
Ray Thompson: rthompson@miconproducts.com

Toll Free in North America: 1 866 683-1285
Phone: (604) 683-1285
Fax: (604) 683-1597